Custom Picture Frames Alberta

Picture Frames

Walnut Built Up Frame

Outside Molding: ¾” Th x 1” T
This molding gently wraps over onto the center core.
Inside Molding: ¼” Th x 3/8” T
This molding attaches to the inside of the center core with a gentle round over edge.
Center Core: ¾” Th x 1” T
Inside and outside molding are made from alder. Birch also makes a striking presentation. Center core made from walnut.

Top Inlay Picture Frame

Frame with Inlay: ¾” x 1 5/16”
Oak Inlay: 3/4” X 1 3/8”
Frame: ¾”th x 1 3/16”
Stain: Medium Brown
Inlay: Reddish Brown
The paint or stain colors are the choice of the customer.

Round Nose Groove Frame

Frame: 1 3/8” Th x 1 1/2” Tall

GROOVE OFFSET FROM CENTER WITH A CHAMFER PERIMETERING THE PICTURE

Finished with a Medium Brown Stain

Built Up Oak

THREE PART BUILDUP
OUTSIDE MOLDING: 1” Tall x ½” w
CENTER CORE: ¾” Th x 1” w
INSIDE MOLDING: 1/4” Th x ½”T

All made from oak. Other species would be equally as enhancing. Look in the gallery to see this frame used in framing a photograph.

Basic Oak Frame Style #1

Frame: ¾”th x 1 ½” T

This frame has straight sides.

The paint or stain colors are the choice of the customer.

Basic Oak Frame Style #2

Frame: ¾” Th x 1 ½” T

Outside edge has a soft gentle round over. Oak frame is finished with purtain pine. Would look great with a variety of other finishes!

Cove & Bead Frame

Frame: 3/4”TH x 2 1/8” W

This can be done on bare wood or with a stain or paint. Either a stain or water based paint enhances the woodgrain. Customer can select their own color to correspond to photo or print.

 

Gloss Black Floating Frame

Frame: 1” w x 1 ½” T

Domed Frame

Frame: 1 3/16”Th x 1 1/8”W

This framing corner profile is done on bare wood. Staining brings out the woodgrains.

Birch Cove & Bead Frame

Frame:  11/16 x 1”

This profile is ideal for smaller photos and pictures.  Also, excellent with other types of hardwood.  And various types of finishes.  Prices will vary depending upon type of wood chosen.

Deer Antler Inlay Frame

Frame Size:  7/8” thick x 2” wide.
Inlay Size:  11/16’ w x ¼” thick.

This frame was designed for 2 pictures, 1 being of a Native Indian Brave in native attire, and the other of a Native Indian Maiden also in native attire. Prices will vary depending upon type of wood chosen.

Oak with Red Oak Inlay Frame

Frame Size: 1” thick x 2” wide.
Frame material is Red Oak; three strips of inlay of quarter sawn Oak.
Inlay Size:  3/16” x 1/4″.  Stained with Puritan Pine.

Prices will vary depending upon type of wood chosen.

Oak with Red Oak Inlay Frame Style #2
Frame Size: 7/8” thick x 1 7/8” wide.
Inlay Size:  1/4” x 1/4″. Stained with Puritan Pine.

Frame material is Red Oak; two strips of inlay of quarter sawn Oak. Prices will vary depending upon type of wood chosen.

Poster Frames

picture framing alberta

Poster Dimensions:
19 1/2 inches (49.5cm) x 37 ¼ inches (94.6cm)

Outside Frame Dimensions:
25 inches (63.5cm) x 44 ½ inches (113.0cm)

Artist Robert Byrne and Barb Wire Enterprises produced a limited edition of the poster entitle

“KEEP YOUR CITY OUT OF MY COUNTRY”.  All editions have now been sold and no new editions will be available.

I will attempt to secure other types of posters for your enjoyment, so watch for the notices under the heading “NEW POSTERS HAVE ARRIVED” and I look forward to framing your choice.  Thanks, Milo

Poster glued to foam core board. The frame is made from Knotty Pine and sanded using 120, 220 and 320 grit sandpaper. Then a light spritzing of water on the surface to raise the grain, let dry and a light sanding to create a smooth surface.
The large knots are sanded using 400 grit sandpaper so as to enhance the rings of the knots. The frame is fastened together by using half lap joints. Two coatings of Pecan stain is applied to the frame letting the stain thoroughly dry after each application and a light sanding to remove the rough surfaces. Then two applications of paste wax are applied and hand rubbed with a buffing cloth, creating a glossy finish to the frame.

A Rabbet on the backside of the frame was routed to receive the poster and fastened in with Framer’s Points.

Price of this frame completed $295.00.

Prices will vary depending upon size of your poster, type of wood chosen, design style of frame and costs involved in shipping to your location.
So if you have a poster that you would like to have mounted and framed, for yourself or a loved one, contact me at Imperial Fine Woodworking and let’s discuss your ideas in getting your poster properly finished and onto your wall so your family and friends can enjoy what you enjoy as well.

Contact Imperial Fine Woodworking

Office Location

282059 Highway 533 West, Nanton AB
Custom Wodowork Frames Picture Alberta